Template:Infobox common
Short Bio
Guten Tag! When it comes to me, I love tech. Since grade school, I've always been fascinated by computer hardware and software, finding ways to tweak and meddle with that of which could probably be left well alone (in a working state). Fixing computers and game consoles, sometimes other electronics and appliances, is what I love doing; that's my fun! I'm easy to get along with, patient and forgiving, so you'll never have me yelling at you for a wrong edit or an article not being formatted the way I prefer. Respect is above all the most important to me, and you'll always be treated fair by me.
As for my part in the community, I started helping out here in March of 2013. Mainly, I maintain the Hardware performance page. There, I make sure that users can make proper comparisons between their hardware and user-posted results by making sure the information they add is correct and formatted for readability. It's my first for Wiki editing though I hope my contributions go a long way towards benefiting those who come to this Wiki.
I make editing mistakes too. In that case, if you have tips for future editing based on previous edits I have made, please let me know through my talk page, User talk:Bb 20, or through an email.
I hope you found this reading enlightening! Have a great day :)
Pages I look after
Here's what I tend to:
- Hardware_performance
- Hardware_performance/create
- Hardware_performance/entries
- Hardware_performance/intro
- Hardware_performance/nav
- Template:HardwareEntry
- Template:HardwareEntry/doc
To Do
- 1.9.x
- SSD's must be listed with their capacity.
- The Samsung 850 EVO 128GB and 256GB models have different transfer speeds as per their capacity. The higher the capacity, the higher the transfer speeds, typically. We don't need this for HDDs or SSHDs.
- iGPUs/APUs, GPUs and CPUs should list their frequencies when overclocked, but not required when at stock freqs.
- Not all users list their devices freqs when asked, so we assume they are defaulted anyway. As long as they list the device model then we can gauge the performance from there. (Should also save a considerable amount of page bytes!)
- Comment lengths may be increased if the above is enacted.
- Suggested extra words could be up to 'two' for a total of 17 words.
- Change seed from "Hardware Performance Test" to "forest".
- I get the feeling that not everyone types it in right when generating a world; not putting in a space, or mistyping.
- We NEED an area like this where: we have low framerates, and an open area where we can see the framerate rise. A mix of these two in one small area will do us very good.
Include a cut-to-the chase tutorial on benchmarking.Can't link any videos as per rules :(No mic audio, include only the required steps. Include posting your entry?
- Recommend setting gamemode to Creative as we don't need to be bothered by any hostile mobs, and we get to the co-ords faster.
- SSD's must be listed with their capacity.
Machine specifications
Desktop | Laptop | Mini PC / NAS | |
Components | Custom built | Acer Aspire v3-571G | Zotac Zbox-BI323-U |
---|---|---|---|
Motherboard | Gigabyte Z77X-UD3H v1.1 | TBA | TBA |
CPU | Intel Core i5-3570K 4.3GHz | Intel Core i5-3210M 2.5GHz | Intel Celeron N3150 1.60GHz |
GPU | Nvidia GeForce GTX 960 4GB (02G-P4-2966-KR) | Nvidia GeForce 630M 2GB DDR3 | Intel HD Graphics (Braswell) 320MHz |
RAM (1st channel) | G.Skill Ares 8GB(2x4GB) F3-1866C(-4GAB | TBA | G.Skill RipJaws 4GB DDR3 1600MHz (F3-1600C9-4GRSL) |
RAM (2nd channel) | G.Skill Ripjaws X 8GB(2x4GB) F3-14900CL9D-8GBXL | n/a | n/a |
Storage (primary) | Samsung 850 EVO 120GB | Mushkin Chronos 32GB SSD | Seagate ST95005620AS SSHD |
Storage (primary) | Western Digital Blue 1TB 7200rpm | n/a | n/a |
Optical | ASUS DRW-24F1ST | n/a | n/a |
PSU | OCZ Fatal1ty 550W (OCZ550FTY) | n/a | n/a |
Chassis | Corsair Carbide 450 Air | n/a | n/a |
CPU Cooler | Cooler Master Seidon 120V | Single blower & heatsink for APU & GPU | Single blower & heatsink for SoC |
Fans | (x2) 120mm | n/a | n/a |
Nvidia tweaks for better gameplay performance
Intro
I have always been interested in tweaking software to have it work faster for me. Overclocking, Windows registry editing, optimization utilities, ect... Those are the types of things that I like to play around with. This nice thing about the Nvidia Control Panel is that you can have profiles per executable that contain different options for how the graphics drivers work with that program. Here, I will show you some of the effects of these profile options when coupled with javaw.exe.
Testing Methodology
Currently, I am using Java JRE 8 to do these tests. However, performance is very similar to that of Java SE 7 Update 40. Also, Fraps is being used to collect these figures. The reason for this is that when you have the debuging overlay enabled while in-game, your FPS drops by a good few percent, a lot of times for me it drops by ~100FPS!
NOTE: Each test below was recorded within 60 second period.
Preset | Min | Max | Avg |
---|---|---|---|
With Debug Screen | 590 | 686 | 657.408 |
Without Debug Screen | 740 | 809 | 791.725 |
If we calculate the percent difference between the average number of frame for both of these results then we come out with a 18.53% FPS difference! I call that a hit, folks.
Results
NOTE: Each test below was recorded within 120 second period.
Preset | Min | Max | Avg |
---|---|---|---|
Java 7, Windowed | 549 | 738 | 661.100 |
Java 7, Fullscreen | 476 | 617 | 536.550 |
Java 8, Windowed | 552 | 842 | 707.600 |
Java 8, Fullscreen | 486 | 616 | 531.967 |
Preset | Min | Max | Avg |
---|---|---|---|
Max pre-rendered = 1, Alt Frame Rendering 2, High Performance, Thread Optimization = ON | 563 | 691 | 648.892 |
Max pre-rendered = 1, Alt Frame Rendering 2, High Performance, Thread Optimization = OFF | 578 | 676 | 637.908 |
Max pre-rendered = 1, Alt Frame Rendering 2, High Performance, Thread Optimization = OFF | 692 | 795 | 767.950 |
Max pre-rendered = 4, Alt Frame Rendering 2, High Performance, Thread Optimization = ON | 547 | 651 | 618.275 |
Max pre-rendered = 4, Alt Frame Rendering 2, High Performance, Thread Optimization = OFF | 656 | 807 | 753.392 |
Max pre-rendered = 4, Alt Frame Rendering 1, High Performance, Thread Optimization = OFF | 688 | 808 | 783.000 |
Max pre-rendered = 4, Single GPU, High Performance, Thread Optimization = OFF | 708 | 814 | 791.717 |
Best Settings
Max pre-renderded frames = 4,
Power management mode = ON,
SLI rendering mode = OFF,
Thread optimization = OFF,
These combination of settings above should give the player the best performance overall.
Conclusion
Changing Nvidia Control Panel options is something you will want to look into if you want to squeeze more performance out of your machine. This is great for if you can't immediately upgrade your hardware components, overclock or if your machine can't be upgraded for that matter.
RAM frequency, does it matter for Minecraft?
Intro
This series of tests will determine if low RAM frequency, or and overclocked set of DIMMs for that matter, has any bearing on Minecraft's performance. I'm putting this in here for all you people, but the idea for doing this is to help me figure out if this information belongs on the Hardware Performance page or not. That is to say, just make things more organised, easier to understand and compare against/with without all sorts of useless information! I will be doing a series of tests similar to that of what I did above with my Java experiments.
A note before preceding!
I've mentioned this before, both in my previous Nvidia tests and on the Hardware Performance page, but make sure that when you are benchmarking to not use the debugging HUD whenever possible! The reason I say this is right below:
NOTE: Each test below was recorded within 120 second period, using the same methods of testing as on the Hardware Performance page.
Preset | Min | Max | Avg | Frames |
---|---|---|---|---|
With Debug Screen | 453 | 519 | 498.642 | 59837 |
Without Debug Screen | 590 | 645 | 618.733 | 74248 |
Again, the FPS hit is big, some 21.49% in fact! This is why it is a good idea to use a program, such as Fraps for instance, to collect the frame rate for you. When I talk about consistency, this is a great example of why the same settings for everyone benchmarking Minecraft matters.
Testing Methodology
With the same testing methodology as written on the Hardware Performance page in mind, the only differences as to how I collected these result are as follows:
- Only used default window size
- I could have done these tests at 2560x1080 or with a maximized window, but I felt that the higher the frame rate I had for each result and using that to compare against other results I created would yield more accurate percentages .. if that makes sense. Also if someone wanted to quantify my results with similar hardware then they wouldn't be restricted to having to use my monitor res to get the same results (one less thing to worry about).
- "Facing: north (Towards negative Z) (180.0 / 0.0)
- This ensures I will always have consistent results! I should just get everyone to do that, ja? :P
- Always day
- I didn't want mobs like Zombies and Skeletons suddenly appearing around me should night come, which could potentially affect my frame rate. (That requires testing out though)
Results
RAM Frequency | Min (FPS) | Max (FPS) | Avg (FPS) | Frames (x34) | Frames (x42) |
---|---|---|---|---|---|
800MHz | 563 | 691 | 648.892 | 27947 | 34032 |
1066MHz | 578 | 676 | 637.908 | 29929 | 36091 |
1333MHz | 692 | 795 | 767.950 | 31127 | 37693 |
1600MHz | 547 | 651 | 618.275 | 30290 | 36694 |
1866MHz | 656 | 807 | 753.392 | 29734 | 36727 |
2133MHz | 688 | 808 | 783.000 | 30763 | 37912 |
Curiously, when I hit 1600 and 1866MHz my frame rate went down. Not sure what happened there, though it looks like the sweet spot is 1333MHz for Minecraft. I'll follow up with more benchmarks (in time).
NOTE: The average frame rate and number of frames drawn per 120 seconds match-up, which in turn means that frames drawn were consistent.
Conclusion
In the end, and I've seen this before with other benchmarks, when I hit 2133MHz I got the same performance as 1333MHz. This means that beyond this there is likely not benefit to amping up your RAM frequency. Although, it looks like increasing your CPU frequency or multiplier can at least do some good!