Tutorials/Storage minecarts

From Minecraft Wiki
Jump to: navigation, search

This tutorial covers basic minecart systems involving Minecart with Chest and Minecart with Hopper.

See also: Tutorials/Minecarts

Item loader

An Item loader is a system which stops a Minecart with Chest or a Minecart with Hopper to feed them with items, and when it's done it restarts the minecarts.











Design A

Design A is probably the simplest. When the hopper has at least one item, it deactivates the Powered Rail so a storage cart coming from right will be stopped under the hopper. After feeding the cart with all the items in the hopper, the powered rail gets reactivated so the cart starts going right. A possible downside of this design is that the powered rail is always active as long as the hopper is empty so if a cart comes to the empty loader it immediately bounces off to the opposite direction. This might lead to an inefficiency of the system if there is a great distance between the loader and unloader.

Earliest Known Publication: 28 March 2013[1]










Design A'

Design A' is an obvious variant of design A to make it flat.
















Design B

The delay of the topmost repeater is set to 4 ticks, and the delay of leftmost one is set to 2 ticks.

Design B is a combination of a hopper and a falling edge detector. It activates the powered rail for 4 redstone ticks only at the moment when the hopper becomes empty, so a cart will stop there until you put some items into the hopper and all of those items are transferred to the cart.

For all the designs shown above, minecart with chest will be stuck at these loaders when the cart has no space to receive items from loaders.

Design C has an advantage that, minecarts with chest will not get stuck as long as they are empty while entering the loader. This design has two operational modes: when the loader doesn't have a cart, a small chest that serves as a "buffer" will accumulate items from the large chest above. And when it has a cart, items in the buffer will be transferred to the cart and nothing more. It has a T Flip-Flop that switches between two modes, connected to a detector rail.

Earliest Known Publication: 5 May 2013[2]












Design C

Layer 1 (bottom)









Design C

Layer 2, the dropper has one item








Design C

Layer 3



Design C

Layer 4 (top)

Design D will detect how full a Minecart with Chest or Minecart with Hopper is and fill it to a certain level before sending it back to where it came from.

The minecart is stopped by the Powered Rail on an incline and the Hopper above. You will need 4 powered rails to get the minecart up the hill enough to be on the Detector Rail properly. The minecart will rest on the Detector Rail so the Comparator in subtract mode can see how full it is. You can fill a container (I show a Hopper because it needs fewer items per signal strength) to a certain level and have a Comparator send that signal into the side of the first Comparator to power the Powered Rail and send the minecart on its way.

If your signal strength is higher than the amount of items your minecart can hold, it will be stuck until someone can move some items around. (Your signal is for full stacks, but you fill the cart with half stacks)


























Design D Side view, first slice.














Design D Top view, top 2 and bottom layers not shown.






Design D Side view, second slice.

Item unloader

An Item unloader is a system which stops a Minecart with Chest or a Minecart with Hopper to take items out of them, and when it's done it restarts the minecarts.












Design A

Design A is probably the simplest. As soon as the hopper receives at least one item from a cart arrived above, it deactivates the Powered Rail so the storage cart came from left will be stopped on top of the hopper. After taking all the items in the cart, the powered rail gets reactivated so the cart starts going left. A possible downside of this design is that the powered rail is always active as long as the hopper is empty so if a cart approaches to the unloader too fast, there is a non-negligible chance that the cart bounces off before getting braked by the deactivated powered rail.

Earliest Known Publication: 28 March 2013[1]













Design A', tileable

Design A' is a tileable variant of design A.

Design B is a variant of design A: It has a detector rail which temporarily deactivates the powered rail to prevent carts from bouncing off.








Design B

Level 1 (bottom)











Design B

Level 2






Design B

Level 3



Design B

Level 4 (top)


















Design C. tileable. The slanted rail is a detector rail.

Design C is a tileable unloader. Larger than design A, but it can hold minecarts with a closed fence gate to prevent them from bouncing off.

For all designs shown above, minecart with chest will be stuck at these unloaders when they have no space to receive items from carts.

References

Promotional Content